|
Your Path: Home
> UST >
People >
LAJ Publications
LAJ Publications
Titles with hyperlinks
can be downloaded as .PDF files. To view the files you will
need Acrobat
Reader.
1970
Juniper LA: Flame Measurements in a
Brown Coal Fired Boiler. Combustion Institute European
Symposium 1973. Academic Press, London, 1973.
Higgins RS, Morley WJ and Juniper LA:
Investigations on Factors Affecting the Combustion of Victorian
Brown Coals. Fourth AllUnion Conference on the Combustion
of Solid Fuels. Novosibirsk, USSR, October 1973.
Juniper LA: A Mathematical Model for
the Combustion of Pulverised Brown Coal. Research Symposium
on Flames and Furnaces. Combustion Institute (Australian Section)
and the Institute of Fuel (Newcastle Branch), Newcastle, February
1975.
Norman JA and Juniper LA: Hot Modelling
of a Prototype Swirl Burner for Pulverised Brown Coal.
Research Symposium on Flames and Furnaces. Combustion Institute
(Australian Section) and the Institute of Fuel (Newcastle
Branch), Newcastle, February 1975.
Juniper LA: Measurement of Flame Temperature
and Atmosphere. The Australian Ceramic Society (Victorian
Branch), Melbourne, September 1976.
Becker HB and Juniper LA: Combustion
and Heat Transfer Modelling in a Brown Coal Fired Furnace.
Symposium on Furnace and High Temperature Heat Transfer. Newcastle,
February 1977.
Juniper LA: Ignition of Brown Coal.
Australian Combustion Science Conference. Melbourne, August
1977.
Becker HB, Juniper LA and Johnson TR:
A Mathematical Model of Combustion and Heat Transfer in Brown
Coal Fired Furnaces. 5th Members Conference of the International
Flame Research Foundation. Nordwijkerhout, The Netherlands,
May 1978.
Juniper LA and Wall TF: Ignition of
Pulverised Brown Coal in Burner Jets. 17th Symposium (International)
on Combustion. University of Leeds, UK, August 1978.
Johnson TR and Juniper
LA: Modelling of Heat Transfer, Combustion and Ignition
Phenomena in Pulverised Coal Fired Furnaces. Conference
on Coal Combustion Technology and Emission Control (Invited
paper). California, USA, February 1979.
1980
Juniper LA: Ignition in a Pulverised
Brown Coal Furnace. National Energy Research, Development
and Demonstration Council, Technical Report No. NERDDP/EG/80/12,
March 1980.
Juniper LA and Wall TF: Combustion
of Particles in a Large Pulverised Brown Coal Flame. Combustion
and Flame Vol 39, pp6981, 1980.
Byrne GJ and Juniper LA: Measurements
in the Burner Jet of a Large Brown Coal Fired Boiler.
Australian Combustion Science Conference, Melbourne, November
1981.
Juniper LA: Costs of Power Station
Construction and Operation for Variable Fuel Specifications.
Intensive Course on Coal Properties, Analysis and Effective
Use. The Institute of Coal Research, University of Newcastle,
May 1982.
StBaker TC and Juniper LA: Combustion
Utilisation Assessment of Brown Coals and Lignites. Symposium
on Coal Resources. Geological Society of Australia, Melbourne,
November 1982.
StBaker TC and Juniper LA: Coal Specification
for Power Station Design Purposes. 4th Conference of Electric
Power Supply Industry. Bangkok, Thailand, November 1982.
Juniper LA and Heap MP: Ignition Testing
of MediumtoLow Volatile Coals. Specialist Workshop on
the Effects of Coal Volatile Matter in Combustion. The Institute
of Coal Research, University of Newcastle, December 1983.
Juniper LA and StBaker TC: Pilotscale
Evaluation of New Thermal Export Coals. National Conference.
Australian Institute of Energy, Brisbane, September 1984.
StBaker TC and Juniper LA: Fullscale
Testing of Australian Coals in Overseas Power Stations.
The Institution of Engineers Australia, Power Generation Panel.
Sydney, August 1985.
Byrne GJ and Juniper LA: Utilisation
Characteristics of Australian Steaming Coals in Overseas Power
Stations. Coal Power '87, The AusIMM Annual Conference,
Newcastle, May 1987.
Juniper LA: Abrasion Characteristics
of Steaming Coal. Steaming Coal Workshop, Institute of
Coal Research, Newcastle, November 1987.
Juniper LA: Overall Evaluation of Coal.
Steaming Coal Workshop, Institute of Coal Research, Newcastle,
November 1987.
Juniper LA and Pohl JH: Application
of Pilot and Laboratory Tests to Predict Coal Performance
in Full-Scale Plant. Mineral Matter and Ash in Coal, Engineering
Foundation Conference, Santa Barbara, California, February,
1988.
Juniper LA: The Single Zone Furnace
Transfer Model Revisited. 3rd Australian Coal Science
Conference, Adelaide, May, 1988.
Joseph SD and Juniper LA: Biomass Energy
Use in Rural Industries of Developing Countries. International
Energy '88, Australian Institute of Energy, Gold Coast, September,
1988.
Juniper LA: The Effect of Coal Properties
on Boiler Operation. Seminar on Reducing the Costs of
Process Heat with Coal-Fired Boilers, Department of Mines,
Queensland, November, 1988.
Conroy AP and Juniper LA: Pilot Scale
Combustion Testing. Australia-USSR Workshop on Advanced
Technologies for Utilisation of Fuels, Electrical Engineering
Foundation, University of Sydney, July, 1989.
Juniper LA: The Coals of Asia and Australia.
Invited paper to Intensive Course on Utilisation of Solid
Fuels, International Flame Research Foundation, Hong Kong,
September, 1989.
Juniper LA and Joseph SD: Energy from
Biomass in Developing Countries. Invited paper to Intensive
Course on Utilisation of Solid Fuels, International Flame
Research Foundation, Hong Kong, September, 1989.
Juniper LA: Overview of Power Station
Planning. Invited paper to Intensive Course on Utilisation
of Solid Fuels, International Flame Research Foundation, Hong
Kong, September, 1989.
Juniper LA: Economics of Coal Utilisation.
Invited paper to Intensive Course on Utilisation of Solid
Fuels, International Flame Research Foundation, Hong Kong,
September, 1989.
Juniper LA: Research Milestones in
Defining the Combustion Characteristics of Australian Coals.
Japan - Australia Workshop on Structural Characterisation
and Use of Australian Coals, Osaka, Japan, October, 1989.
Smith IW, Wall TF, Baker JW, Holcombe
D, Harris DJ, Juniper LA and Truelove JS: The Combustion
Behaviour of Low-Volatile Australian Coals. NERDDP Project
1110 End of Grant Report, November, 1989.
Conroy AP, Juniper LA and Phong-Anant
D: The Impact of Coal Pulverising Characteristics on Power
Plant Performance. International Conference on Coal Science.
Tokyo, Japan, October, 1989.
Bennett PA and Juniper LA: Mathematical
Models to Relate Bench and Pilot Scale Test Data to Power
Station Performance - A Critical Survey. ACA Project C18
(A07/0627) End of Grant Report, January, 1989.
1990
Smith IW, Wall TF, Baker JW, Holcombe
D, Harris DJ, Juniper LA and Truelove JS: The Combustion
Behaviour of Low-Volatile Australian Coals. NERDDP Project
1110 Supplementary End of Grant Report, January, 1990.
Phong-Anant D, Reifenstein A, Pang LSK,
Vassallo AM, Wilson MA and Juniper LA: A Characterisation
of Mineral Transformation in Boiler Deposits. Australian
Workshop on Ash Deposition, Brisbane, June, 1990.
Conroy AP and Juniper LA: Relationship
Between Pilot Scale and Full Scale Ash Deposition Characteristics.
Australian Workshop on Ash Deposition. Brisbane, June, 1990.
Juniper LA and Smith GB: Research Achievements
in Defining the Combustion Characteristics of Australian Coals.
IEAust 1990 International Coal Engineering Conference, Sydney,
June, 1990.
Smith G and Juniper L: An Evaluation
of Queensland Thermal Coal Quality. Geological Society
of Aust Inc, Bowen Basin Symposium 1990, September, 1990.
Juniper LA and Pohl JH: Techniques
to Control NOx Emissions from Australian
Coal Fired Boilers. 1st Australian Flame Days, Brisbane,
December, 1990.
Juniper LA, Holcombe D and Conroy AP:
Combustion Testing of Three Overseas Coals - A Reference
for Comparison of Australian Steaming Coals. NERDDP Project
1345, End-of-Grant Report, ACIRL Ltd, December, 1990.
Smith IW, Wall TF, Baker JW, Holcombe
D, Harris DJ, Juniper LA and Truelove JS: The Combustion
Behaviour of Low Volatile Australian Coals. 1st Australian
Flame Days, Brisbane, December, 1990.
Juniper LA: Large Scale Combustion
of Coal. Chemical Engineering in Australia Vol 16, No
1, pp13-15, 1991.
Juniper LA and Conroy AP: Correlation
Between Pilot Scale Combustion Test Results and Performance
of Coals in Full scale Plant. 2nd Australian Flame Days,
Sydney, October, 1991.
Juniper LA: Pilot Scale Test Facilities
at the Australian Combustion Technology Centre. 2nd Australian
Flame Days, Sydney, October, 1991.
Juniper LA and Holcombe D: Formation
and Control of NOx Emissions from
Coal Fired Boilers. Seminar on Clean Use of Coal, Australian
Institute of Energy, Brisbane, October, 1992.
Juniper L: Developments in Pulverised
Fuel Combustion. ACA Coal Utilisation Workshop, Australian
Coal Association, Brisbane, May, 1993.
Pohl JH, Juniper LA and Conroy A: The
Causes and Prevention of Slagging in Power Plants. The
Impact of Ash Deposition on Coal Fired Plants, Engineering
Foundation, Solihull, UK, June, 1993.
Creelman RA, Holcombe D, Gottlieb P, Trenaman
KJ and Juniper LA: Fly Ash Erosion Measurements in Utility
Boilers and a Pilot Scale Facility. The Impact of Ash
Deposition on Coal Fired Plants, Engineering Foundation, Solihull,
UK, June, 1993.
Juniper LA and Pohl JH: Slagging Investigations
at Callide 'B' Power Station. 3rd Australian Flame Days,
Newcastle, November, 1993.
Conroy AP and Juniper LA: Thermal Coal
Blending. 3rd Australian Flame Days, Newcastle, November,
1993.
Borio, RW, Mehta AK, Juniper LA and Pohl
JH: The Impact of Coal Quality on Power Plant Performance.
Workshop on Impact of Coal Quality on Power Plant Performance,
Australian Combustion Technology Centre, ACIRL Ltd, May, 1994.
Juniper LA and Pohl JH: Slagging Investigations
at Callide 'B' Power Station. Workshop on Impact of Coal
Quality on Power Plant Performance, Australian Combustion
Technology Centre, ACIRL Ltd, May, 1994.
Pohl JH, Juniper LA and Conroy AP:
Use of Ash Viscosity to Estimate Slagging in Boilers.
Workshop on Impact of Coal Quality on Power Plant Performance,
Australian Combustion Technology Centre, ACIRL Ltd, May, 1994.
Fewster M, Juniper L, Ottrey A, Creelman
R and Pohl: Plant Investigation of Slagging at Callide
Power Station. Pacific Rim International Conference on
Environmental Control of Combustion Processes, American and
Japanese Flame Research Committees, Hawaii, USA, October,
1994.
Juniper LA and Conroy AP: Technology
Tools to Support the Marketing of Thermal Coal. Centennial
Geocongress (1995), Geological Society of South Africa, Johannesburg,
South Africa, April, 1995.
Pohl JH and Juniper LA: Slagging: Problem
Definition. Application of Advanced Technology to Ash-Related
Problems in Boilers, Engineering Foundation, Waterville
Valley, New Hampshire, USA, 1995.
Juniper LA: Practical
Coal Quality Evaluation of Export Thermal Coals.
1995 Bowen Basin Symposium, Geological Society of Australia
Inc., Mackay, 1995.
Juniper LA and Pohl JH:
Design
of Pilot Scale Rigs to Simulate Combustion Processes.
Australian Symposium on Combustion including Forth Australian
Flame Days, Combustion Institute, Australian Section and Australian
Flame Research Committee, Gawler, 1995.
Juniper LA: Reactivity
Issues Relating to Blends of Thermal Coals.
Workshop on Characterisation for Existing and Emerging Technologies,
CRC for Black Coal Utilisation, Newcastle, 1996.
Juniper LA: Ash
Deposition Indices Revisited.
Workshop on Impact of Coal Quality on Thermal Coal Utilisation,
Brisbane, 1996.
Pohl JH, Radway JE and Juniper LA: The
Effect and Mechanisms of Additives on Slagging. Workshop
on Impact of Coal Quality on Thermal Coal Utilisation, Brisbane,
1996.
Juniper LA and Pohl JH:
Impact
of Coal Properties on Power Generation Costs.
Workshop on Impact of Coal Quality on Thermal Coal Utilisation,
Brisbane, 1996.
Pohl JH, Juniper LA and Conroy AP: The
Effects of Coal Properties on Power Plant Performance.
7th Australian Coal Science Conference, Australian Institute
of Energy, Monash University, Gippsland, 1996
Juniper LA, 1997. Application
of the TMA Technique to Predict Coal Performance Based on
Ash Melting Characteristics, CRC for
Black Coal Utilisation, Newcastle.
Juniper LA and Pohl JH: What
Price Coal Quality in Electric Power Generation?.
Australian Coal Review, Issue 3, July 1997.
Gupta SK, Gupta RP, Bryant GW, Juniper
LA and Wall TF, 1997. Thermochemical Analysis and Alternative
Ash Fusion Temperatures. Impact of Mineral Impurities
in Solid Fuel Combustion, Engineering Foundation, Kona, Hawaii,
USA.
Juniper LA, 1998. Advanced
Laboratory Techniques for Thermal Coal Evaluation.
Australian Coal Review, Issue 5, April, 1998.
Juniper LA, 1998. Pilot
Scale Evaluation of Australian Thermal Coal for Combustion
and Gasification. Australian Coal Review, Issue
6, October, 1998.
Juniper LA, 1999. What
does Pilot and Main Plant Testing Tell Me?.
Workshop on Ash Impacts in PF Firing, CRC for Black Coal Utilisation,
Newcastle, NSW.
2000
Juniper LA, 2000. Comparison
of Fuels from Efficiency and Environmental Perspectives.
Asia Coal vs Gas Conference, Singapore.
Juniper LA, 2000. New
Technologies for Competitive Electricity Supply in Australia.
24th Annual Conference of the Australian Mining
& Petroleum Law Association, Freemantle, WA.
Huber G and Juniper L, 2001.
Development
of an Automatic Ash Fusion Temperature Measurement. Proceedings
of the 18th Annual International Pittsburgh Coal
Conference, Newcastle, NSW, Australia.
Juniper L, 2002. Clean
Coal in a Competitive Electricity Market.
APEC Conference on Coal in Sustainable Development
in the 21st Century, Kuala Lumpur, Malaysia, 4
- 8 March.
Juniper L and Davison J, 2002.
A
Workbook for Screening Options to Reduce CO2 Emissions from
Existing Power Stations. 6th Int Conference
on Greenhouse Gas Control Technologies, Kyoto, Japan, 1 October
- 4 November.
Juniper L, Harris D and Patterson
J, 2002. Australian
Clean Coal Technology. Int Conference on Clean
Coal Technologies for our Future, Sardinia, Italy, 21 - 23
October.
Creelman RA, Bamberry J and
Juniper LA, 2003. Alkali
Based Slagging: A Case Study from Leigh Creek.
12th International Coal Science Conference, Cairns, Australia,
2 - 6 November 2003. (50kB)
|
Home
|
Fuel
& Power
|
Coal
Technology
|
Renewables
|
U/S
Services
|
Other
|
UST
|
Network
|
Contact
Us
|
| Coal
Evaluator |
Publications |
Bits
& Pieces |
What's
On |
| ©
Copyright 2006. Ultra-Systems Technology.
Web Design and Maintenance by ALFRESCO
DESIGN |
|